Maytag Appliance Repair

There are a number of problems that could impact your Maytag dryer’s performance. You can attempt to avoid issues with regular maintenance, like cleaning your dryer and emptying your lint trap. That being said, it is sometimes difficult to avoid problems with your dryer, like:

• The dryer is not turning on
• Maytag dryer not getting warm after starting a cycle
• Dryer is not spinning after starting a cycle
• Dryer is making strange noises or is too noisy
• Maytag dryer is getting too hot during a cycle
• Dryer is vibrating too much
• Maytag dryer doesn’t won’t heat up or properly dry clothes

It’s recommended that you check your Maytag electric supply before calling a technician. If the power supply for your oven is in order, then the problem is best determined by a professional.

When your washer gives you trouble, it can be a very frustrating experience. The idea of cleaning all your clothes manually is a non-starter for most homeowners. Modern washers are known for their many features and, as a result, some of the most common Maytags are:

• The electronic part of your appliance. In some cases it’s a small part that needs to be replaced and, in other cases, some more significant parts need changing.
• Pump problems can prevent water from entering or leaving your washer, and this could mean that you’ll need to get some buckets ready while you wait for the technician
• The motor on any washer works particularly hard during every wash cycle and wear and tear in this area can also cause parts to break
• Maytag washer is not turning on
• Washer won’t spin during a cycle
• The washer fails to drain
• Maytag washer is leaking water
• Maytag washer is vibrating
• Washer won’t run or stops mid-cycle
• Washer smells bad

No matter the problem or make of your washer, Max Appliance Repair will be right over to take care of the issue.

When you notice a fault with your Maytag dishwasher, it can be quite unsettling. Just thinking about having to wash dishes by hand is enough to leave anyone feeling frustrated. Modern dishwashers are known for their complex functions and features, which means that the fault could be mechanical or electronic. You can do things like cleaning your dishwasher to help maintain the unit, but that doesn’t mean that issues won’t pop up from time to time. The first thing to remember is to check your water and power supply before calling a technician. If both are working properly, then the fault is most likely with the dishwasher. Here are some common issues that could be negatively impacting your washer:

• Problem with the thermostat
• The pump is not working properly
• Dishwasher motor doesn’t work properly
• Dishes aren’t coming out clean
• The unit is making strange noises
• Maytag dishwasher is not draining
• The Maytag dishwasher is leaking
• Dishwasher is not turning on
• Maytag dishwasher doesn’t dry dishes
• Dishwasher smells bad
• Dishwasher doesn’t dispense soap

There could be a number of reasons why your Maytag stove suddenly stops working as it should. The good news is that our Maytag technicians has fixed many of these problems, so you don’t have to resort to DIY repairs. So we invite you to give us a call if your stove is experiencing any of the following problems:

• You are unable to adjust the heat on your unit
• The stove knobs are broken
• The Maytag stove coils are not heating
• The coils are damaged or are loose
• The electric supply is not working properly
• Maytag Stove burner won’t heat
• The stove can’t maintain the temperature

Remember, it’s always best to call a professional technician for safe repairs!

Since your Maytag fridge is made up of dozens of components, it’s understandable for various parts to experience wear and tear over time. Usually, there are a collection of common problems that the average fridge will experience. As parts become worn or break, you may notice a change in the performance of your fridge. Here are a few common fridge issues that we can help you with:

• The water dispenser is not working properly
• Fridge motor has stopped working
• Temperature fluctuates
• The food isn’t cool
• Ice isn’t coming out of the ice maker
• Fridge is making loud and/or strange noises
• Maytag Fridge is leaking
• Food in your fridge is starting to freeze
• There is ice build-up in the freezer
• Freezer is not cooling properly
• Fridge doors not closing properly
• Fresh food compartment warming up
• Ice maker overflowing

If you notice any of these faults with your Maytag fridge, then it is time to get in touch with our experts. In every case, it is better to address these issues sooner rather than later.

Ovens are pretty durable appliances overall. That being said, it is not immune from small and big issues. You can do things like cleaning your oven regularly and inspecting your oven regularly, but issues will pop up from time to time. Luckily, our Maytag technicians are only a phone call away. We can fix any issue with your oven, including:

• Temperature regulation issues
• Oven won’t turn on
• Maytag Oven is not cooking meals properly
• The door is not aligned properly
• The door does not close properly
• Maytag oven interior light is not working
• Oven won’t heat to the right temperature

It’s recommended that you check your Maytag electric supply before calling a technician. If the power supply for your oven is in order, then the problem is best determined by a professional.

• LOC/LC: Control Lock Activated
Control Lock can be activated by touching the Control Lock button on your vehicle, or (on older models) it can be activated by checking your Owner’s Manual to determine what button activates it.

• dET – Detergent Cartridge Not Dispensing
Use single-load doses of detergent instead. Make sure you have inserted the dispenser cartridge correctly and closed the dispenser drawer completely.

• F7/E1: Motor Speed Sensor Error
To clear the error code first, make sure that all the shipping bolts have been removed and that the washer has not been overloaded. Then press the Pause or Cancel button twice and the Power button once to clear the error code.

• rL/F34: Items Detected In Washer During Cycle
After removing items from the drum, restart the Clean Washer cycle.